Epson EMP-X56 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EMP-X56
  6. User manual

Epson EMP-X56 User Manual

Multimedia projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EMP-X56

Summary of Contents for Epson EMP-X56

  • Page 1 User's Guide...
  • Page 2 Notations Used in This Guide Safety Indications So that you can use the projector safely and correctly, symbols are applied in the documentation and on the projector to indicate possible harm to the user or to others and the risk of damage to property. The indications and their meaning are as follows.

  • Page 3: Table Of Contents

    Contents Projector Features..................4 Appendices Part Names and Functions ................5 Installation Methods ................49 Front/Top......................5 Rear (EMP-83/822 Only)..................6 Cleaning ....................50 Rear (EMP-X5/S5 Only)..................7 Cleaning the Projector's Surface ............... 50 Control Panel ....................... 8 Cleaning the Lens....................50 Remote Control ....................

  • Page 4: Projector Features

    Projector Features Ease of use Enhanced security functions The A/V mute slide makes it easy to project and store Password Protect to restrict and manage users By setting a password you can restrict who can use the projector. s p.18 You can stop and resume projection easily by opening and closing the A/V mute slide which makes giving clear...

  • Page 5: Part Names And Functions

    Part Names and Functions Front/Top Name Function Front adjustable Extend and adjust the position of the projected feet image when the projector is placed on a surface such as a desk. s Quick Start Guide Foot adjust lever Pull out the foot lever to extend and retract the front foot.

  • Page 6: Rear (Emp-83/822 Only)

    Part Names and Functions Rear (EMP-83/822 Only) Name Function RS-232C port When controlling the projector from a computer, connect it to the computer with an RS-232C cable. This port is for control use and should not normally be used. s p.67 Computer1 input For video signals from a computer and...

  • Page 7: Rear (Emp-X5/S5 Only)

    Part Names and Functions Rear (EMP-X5/S5 Only) Name Function Computer input For video signals from a computer and port component video signals from other video sources. Audio-L/R input Connects to the audio output port for the port equipment you want to project from and inputs the audio.

  • Page 8: Control Panel

    Part Names and Functions Control Panel Name Function [Power] button Turns the projector power on or off. s Quick Start Guide EMP-83/822/X5 Status indicators The color of the indicators and whether they are flashing or lit indicates the status of the projector.
  • Page 9 Part Names and Functions Name Function [Menu] button Displays and closes the configuration menu.s p.23 [Wide] [Tele] Adjusts the image size. buttons If pressed when a configuration menu or a help (EMP-S5 only) screen is displayed, these buttons select menu items and setting values.

  • Page 10: Remote Control

    Part Names and Functions Remote Control Name Function [Menu] button Displays and closes the configuration menu. p.23 [Enter/Auto] If pressed during projection of computer signal button images, it automatically adjusts the tracking, synchronization, and position to project the optimum image. s p.26 When a configuration menu or a help screen is displayed, it accepts and enters the current...

  • Page 11: Base

    Part Names and Functions Base Name Function [Volume -] button Press [Volume -] to lower the volume and [Volume +] button press [Volume +] to raise the volume. If pressed when a configuration menu or a help screen is displayed, these buttons select menu items and setting values.

  • Page 12: Useful Functions

    Useful Functions This chapter explains useful functions for giving presentations and so on, and the security functions. Changing the Projected Image Security Functions..........18 (Source Search) ..........13 • Managing Users (Password Protect)....... 18 Type of Password Protect .............. 18 Functions for Enhancing Projection ....14 Setting Password Protect..............

  • Page 13: Changing The Projected Image (Source Search)

    Changing the Projected Image (Source Search) The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected. The following screen showing the status of image signals is displayed when only the image that the projector is You can project the target image quickly because it skips input ports currently displaying is available, or when no image signal where no image is being input.

  • Page 14: Functions For Enhancing Projection

    Functions for Enhancing Projection Selecting the Projection Quality (Selecting Color Procedure Mode) Remote control You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected. Mode Application Game...

  • Page 15: Hiding The Image And Sound Temporarily (A/V Mute)

    Functions for Enhancing Projection Hiding the Image and Sound Temporarily (A/V Mute) • If you use this function when projecting moving images, You can use this when you want to focus the audience's attention on what the images and sound continue to be played back by the you are saying, or if you do not want to show details such as when you are source, and you cannot return to the point where A/V Mute was activated.

  • Page 16: Freezing The Image (Freeze)

    Functions for Enhancing Projection Freezing the Image (Freeze) Changing the Aspect Ratio (Aspect) When the moving image on the screen is frozen, the image continues to When video equipment is connected, images that have been recorded in project, so you can project a moving image one frame at a time like a still digital video or onto DVDs can be viewed in 16:9 wide-screen format.

  • Page 17: Enlarging Part Of The Image (E-Zoom)

    Functions for Enhancing Projection Move the cross to the area of the image that you If you press the button while the aspect name is displayed on the screen, it want to enlarge. changes to the next aspect mode. Remote control This can also be set using "Aspect"...

  • Page 18: Security Functions

    Security Functions The projector has the following enhanced security functions. • Settings for "Display Background", "Startup Screen", and "A/V • Password Protect Mute" are changed from "Display" in the configuration menu. 3 "Network Protect" (EMP-83/822 only) You can limit who can use the projector. When "Network Protect"...

  • Page 19: Setting Password Protect

    Security Functions Turn on "User's Logo Protect" Setting Password Protect (1) Select "User's Logo Protect", and then press the [Enter] button. Use the following procedure to set Password Protect. (2) Select "On", and then press the [Enter] button. (3) Press the [Esc] button. Procedure Turn on "Network Protect".

  • Page 20: Restricting Operation (Operation Lock)

    • If you continue to repeat the above operation and input the wrong password thirty times in succession, the following message is displayed and the projector does not accept any more password entries. "The projector's operation will be locked. Contact Epson as described in your documentation." Inquiries...

  • Page 21: Anti-Theft Lock

    Security Functions Anti-Theft Lock As the projector is often setup on ceiling mounts and left in rooms unattended, it is possible that someone may try and take the projector, so the projector includes the following security devices. • Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington.

  • Page 22: Configuration Menu

    Configuration Menu This chapter explains how to use the configuration menu and its functions. Using the Configuration Menu ......23 List of Functions..........24 • Image Menu (EMP-83/822 Only)........24 • Image Menu (EMP-X5/S5 Only) ........25 • Signal Menu (EMP-83/822 Only)........26 •...

  • Page 23: Using The Configuration Menu

    Using the Configuration Menu Selecting from the Selecting from the Changing the Exit top menu sub menu selected item Top menu Guide Sub menu (Settings) For EMP-83/822/X5 For EMP-S5 Buttons used Using the control panel Select the setting to change For EMP-83/ For EMP-S5 822/X5...

  • Page 24: List Of Functions

    List of Functions Image Menu (EMP-83/822 Only) Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Computer image Component video /Composite video /S-video Sub Menu...

  • Page 25: Image Menu (Emp-X5/S5 Only)

    List of Functions Image Menu (EMP-X5/S5 Only) Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Computer image Component video /Composite video /S-video Sub Menu...

  • Page 26: Signal Menu (Emp-83/822 Only)

    List of Functions Signal Menu (EMP-83/822 Only) Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Computer image Component video Composite video /S-video Sub Menu...

  • Page 27: Signal Menu (Emp-X5/S5 Only)

    List of Functions Signal Menu (EMP-X5/S5 Only) Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Computer image Component video Composite video /S-video Sub Menu...

  • Page 28: Settings Menu

    List of Functions Settings Menu For EMP-83/822 For EMP-X5 For EMP-S5 Sub Menu Function Keystone You can correct vertical keystone distortion in images.s Quick Start Guide Auto Keystone Performs automatic keystone correction. (EMP-83/822/X5 (This can only be specified when "Front" is selected from "Extended" - "Projection".) only) Zoom Adjusts the image size.

  • Page 29: Extended Menu

    List of Functions Extended Menu For EMP-83/822 For EMP-X5/S5 For EMP-X5/S5 (Euro) Sub Menu Function Display You can make settings related to the projector's display. Messages: You can set whether to display (On) or not display (Off) the source name when you change the input source, the color mode name when you change the Color Mode, a message when no image signal is input, and so on.
  • Page 30 List of Functions Sub Menu Function Operation Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off). When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity may cause the projector to turn on automatically.

  • Page 31: Network Menu (Emp-83/822 Only)

    List of Functions Network Menu (EMP-83/822 Only) When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after setting "Network Protect" to "Off". s p.19 Sub Menu Function Wired LAN You can make network settings.
  • Page 32 List of Functions Sub Menu Function SNMP You can make SNMP settings. Trap IP Address 1/Trap IP Address 2: You can register up to two IP addresses for the SNMP trap notification destination. The IP address registered in "Trap IP Address 2" is used when the IP address in "Trap IP Address 1" cannot be accessed. To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer.
  • Page 33 List of Functions *2 When the Mail Notification function is set to "On" and a problem or warning occurs with a projector, the following mail is sent. Subject: EPSON Projector First line: The name of the projector where the problem has occured...

  • Page 34: Info Menu (Display Only)

    List of Functions Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending on the image signal currently being projected as shown in the following screen shots. Computer image/Component video Composite video /S-video...

  • Page 35: Reset Menu

    List of Functions Reset Menu For EMP-83/822 For EMP-X5/S5 Sub Menu Function Reset All You can reset all items in all menus to their default settings. (EMP-83/822 only) The following items are not reset to their defaults: "Computer1 Input", "Computer2 Input", "User's Logo", all items in "Network" menu, "Lamp Hours", and "Language".

  • Page 36: Troubleshooting

    Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help............. 37 Problem Solving ..........38 • Reading the Indicators............38 t Power indicator lights red ............39 i o Indicator is lit or flashing orange...........40 •...

  • Page 37: Using The Help

    Using the Help Confirm the selection. If a problem occurs with the projector, Help uses on-screen displays to assist you in solving the problem. Using the remote control Using the control panel Procedure Press the [Help] button. The help screen is displayed. Using the remote control Using the control panel Questions and solutions are displayed as shown on the screen...

  • Page 38: Problem Solving

    Problem Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help". s p.41 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector.

  • Page 39: Power Indicator Lights Red

    Problem Solving Problem t Power indicator lights red : Lit : Flashing: : Off Status Cause Remedy or Status Internal Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the International Warranty Terms.

  • Page 40: I O Indicator Is Lit Or Flashing Orange

    Problem Solving Warning i o Indicator is lit or flashing orange : Lit : Flashing : Off : Varies according to the projector status Status Cause Remedy or Status High Temp Warning (This is not a problem. However, if the temperature rises too high again, projection stops automatically.) •...

  • Page 41: When The Indicators Provide No Help

    Problem Solving When the Indicators Provide No Help Problems when projection starts If any of the following problems occur and the indicators do not offer a Power does not turn on s p.46 solution, refer to the pages given for each problem. Problems relating to images Other problems No images appear s...

  • Page 42: Problems Relating To Images

    Problem Solving Problems relating to images No images appear Check Remedy Did you press the [Power] button? Press the [Power] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly.
  • Page 43 Problem Solving The message "Not supported." is displayed Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal"-"Video Signal" p.26 Only when projecting images from a video source Do the image signal resolution and the refresh rate Refer to the computer's documentation for how to change the image signal resolution and the refresh rate correspond to the mode? output from the computer.
  • Page 44 Problem Solving Interference or distortion appear in images Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal"-"Video Signal" p.26 Only when projecting images from a video source Are the cables connected correctly? Check that all the cables required for projection are securely connected.
  • Page 45 Problem Solving Image colors are not right Check Remedy Do the input signal settings match the signals from the Change the following settings according to the signal for the connected equipment. connected device? When projecting images from equipment connected to Computer1, Computer, or Computer2 Input, see s "Signal"-"Computer1/2 Input"...

  • Page 46: Problems When Projection Starts

    Problem Solving Problems when projection starts Power does not turn on Check Remedy Did you press the [Power] button? Press the [Power] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly.
  • Page 47 Problem Solving The remote control does not work Check Remedy Is the remote control light-emitting area pointing towards the Point the remote control towards the remote receiver. remote receiver on the projector when it is operated? The operating angle for the remote control is about 30 horizontally, and about 15 vertically. s Quick Start Guide Is the remote control too far from the projector? The operating range for the remote control is about 6 m.

  • Page 48: Appendices

    Appendices This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come. Installation Methods ........... 49 Optional Accessories and Consumables ..64 Optional accessories............... 64 Cleaning............... 50 Consumables .................. 64 •...

  • Page 49: Installation Methods

    Installation Methods The projector supports the following four different projection methods. • Project images from in front • Project images from behind a of the screen. translucent screen. (Front projection) (Rear projection) Warning • A special method of installation is required when suspending the projector from a ceiling (ceiling mount).

  • Page 50: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention If dust collects on the air filter it can cause the internal temperature of the projector to rise, and this can lead to problems with operation Cleaning the Projector's Surface and shorten the optical engine's service life.

  • Page 51: Replacing Consumables

    Replacing Consumables Replace the old batteries with new batteries. This section explains how to replace the remote control batteries, the lamp, and the air filter. Caution Replacing the Remote Control Batteries Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way.

  • Page 52: Replacing The Lamp

    Replacing Consumables Replacing the Lamp Attention • The lamp replacement message is set to appear after the following Lamp replacement period time periods in order to maintain the initial brightness and quality It is time to replace the lamp when: of the projected images.

  • Page 53: How To Replace The Lamp

    Replacing Consumables How to replace the lamp Procedure After you turn off the projector's power and the Warning confirmation buzzer beeps twice, disconnect the • When replacing the lamp because it has stopped illuminating, power cable. there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on Wait until the lamp has cooled down, then remove the ceiling, you should always assume that the lamp is broken,...
  • Page 54 Replacing Consumables Loosen the two lamp fixing screws. Install the new lamp. Insert the new lamp along the guide rail in the correct direction so that it fits in place, push down firmly at the location marked "PUSH", and once it is fully inserted tighten the two screws. Take out the old lamp.

  • Page 55: Resetting The Lamp Operating Time

    Replacing Consumables Replace the lamp cover. Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the lamp does not turn on.

  • Page 56: Replacing The Air Filter

    Replacing Consumables Install the new air filter. Replacing the Air Filter Slide the air filter in from the outside and push until it clicks into place. Air filter replacement period It is time to replace the air filter when: • The air filter is ripped. •...

  • Page 57: Saving A User's Logo

    Saving a User's Logo In the configuration menu, select "Extended"- You can save the image that is currently being projected as a user's "User's Logo". logo. s "Using the Configuration Menu" p.23 Depending on the area of purchase, the User's Logo function may not be available for EMP-X5/S5.
  • Page 58 Saving a User's Logo Move the box to select the part of the image to use When "Select this image?" is displayed, select as the user's logo. "Yes". Select the zoom factor from the zoom setting screen. When the message "Save this image as the User's Logo?"...

  • Page 59: Screen Size And Distance

    Screen Size and Distance EMP-83/822/X5 See the following table to choose the best position for your projector. The values are only a guide. Units: cm (in.) Units: cm (in.) Projection Distance Projection Distance Offset 4:3 Screen Size Offset 16:9 Screen Size Minimum Maximum Minimum Maximum (When image position...

  • Page 60: Emp-S5

    Screen Size and Distance EMP-S5 See the following table to choose the best position for your projector. The values are only a guide. Units: cm (in.) Units: cm (in.) Projection Distance Projection Distance Offset Offset (When image position 4:3 Screen Size 16:9 Screen Size Minimum Maximum Minimum Maximum...

  • Page 61: Connecting To External Equipment

    Connecting to External Equipment Connecting to an External Monitor Connecting to External Speakers (EMP-83/822 Only) Computer images being input to the Computer1 input port or the You can connect speakers with built-in amplifiers to the projector's Audio Computer Input port can be displayed on an external monitor and the Out port to enjoy a fuller quality of sound.

  • Page 62: Connecting A Lan Cable (Emp-83/822 Only)

    Connecting a LAN Cable (EMP-83/822 Only) Connect with a commercially available 100baseTX or 10baseT type LAN cable. To LAN port To LAN port LAN cable (commercially available) Attention To prevent malfunctions, use a category 5 shielded LAN cable.

  • Page 63: Connecting A Usb Cable (Emp-X5/S5 Only)

    Connecting a USB Cable (EMP-X5/S5 Only) Connect the USB port of a computer and the USBport (TypeB) on the rear of the projector with a commercially available USB cable. To USB port To USB port (Type B) USB cable...

  • Page 64: Optional Accessories And Consumables

    Optional Accessories and Consumables Prepare the following options and consumables. Purchase depending Consumables on usage. The following list of optional accessories is current as of Lamp unit (For EMP-X5/S5) ELPLP41 March, 2007. Details of accessories are subject to change without Lamp unit (For EMP-83/822) ELPLP42 notice and availability may vary depending on the country of purchase.

  • Page 65: Glossary

    Glossary This section briefly explains terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. Aspect ratio The ratio between an image's length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The aspect ratio for standard images is 4:3.
  • Page 66 Glossary Squeeze mode In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the recording medium as 4:3 images. When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format. sRGB An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet.

  • Page 67: Esc/Vp21 Commands

    ESC/VP21 Commands Command List Cable Layouts When the power ON command is transmitted to the projector, the power Serial connection (EMP-83/822 Only) turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. •...

  • Page 68: Connecting A Usb (Emp-X5/S5 Only)

    Procedure Download the USB driver (USB-COM Driver) from the Epson Web site to your computer. (Type B) Go to http://www.epson.com and select the support section of your local Epson Web site. Install the downloaded USB driver onto your computer. Read the instructions displayed on the download screen.

  • Page 69: Pjlink (Emp-83/822 Only)

    Machine and Information System Industries Association) as a standard information query" protocol for controlling network-compatible projector's as part of their EPSON efforts to standardize projector control protocols. The projector complies with the PJLink Class 1 standard established Model name displayed for "Product name information by the JBMIA.

  • Page 70: List Of Supported Monitor Displays

    List of Supported Monitor Displays Computer image *1 Connection is not possible if the equipment does not have a VGA output port. *2 EMP-S5 is not supported. Number of Even when signals other than those mentioned above are input, it is likely that the Pixels Used image can be projected.

  • Page 71: Specifications

    Specifications Product name EMP-83/822 EMP-X5 EMP-S5 Pixelworks DNX are used in this projector. Dimensions 327 (W) ^ 92 (H) ^ 245 (D) mm Panel size 0.63" 0.55" Display method Polysilicon TFT active matrix Angle of tilt Resolution 480,000 pixels 786,432 pixels XGA SVGA (800 (W) ^ (1024 (W) ^ 768 (H) dots) ^ 3 600 (H) dots) ^ 3...
  • Page 72 (male) LAN port RJ45 USB port (Type B) USB connector (Type B) * This supports USB2.0. USB ports are not guaranteed to operate all devices that support USB. Other detailed specifications, please access your location (country/area) from Epson homepage, http://www.epson.com...
  • Page 73 Specifications Safety standards USA: UL60950-1 Canada: CSA C22.2 No.60950-1 EU: The Low Voltage Directive (73/23/EEC) IEC/EN60950-1 This product is also designed for IT power distribution system with phase-to-phase voltage 230V. EMC standards USA: FCC Part 15B Class B (DoC) Canada: ICES-003 Class B EU: The EMC Directive (89/336/EEC) EN55022, Class B...
  • Page 74 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television Epson America, Inc. reception, which can be determined by turning the equipment off and on, the...

  • Page 75: Appearance

    Appearance The external dimensions for EMP-83/822/X5/S5 are the same. 3-M4Þ9 Center of lens 103.8 94.9 245.0 92.0 56.2 13.3 83.5 327.0 115.0 127.0 69.5 * Distance from center of lens to suspension bracket fixing point Units: mm...

  • Page 76: Index

    Index Indicators ............38 Info menu ............34 Input Signal ............34 A/V Mute ............. 15 DHCP ..............31 IP address ............31 A/V mute slide ............5 Direct Power On ..........30 Abs. Color Temp..........25 Display ..............29 Air exhaust vent ............ 5 Display Background ..........29 Air filter ..............
  • Page 77 Index Sharpness .............24, 25 Video Signal ..........26, 27, 34 Signal menu ............25 Volume ..............28 Part names and functions ........5 Sleep Mode ............30 Password protect ..........18 SMTP Server ............32 SNMP ..............32 Password protect sticker ........19 Warning mail ............33 Photo ..............
  • Page 78 Microsoft Corporation in the U.S and/or other countries. Dolby is a trademark of Dolby Laboratories. Neither Seiko Epson Corporation nor its affiliates shall be liable to the Pixelworks and DNX are trademarks of Pixelworks, Inc. purchaser of this product or third parties for damages, losses, costs, or...

This manual is also suitable for:

Emp-822Emp-x5Emp-s5Emp-83

Table of Contents