Epson EMP-835 User Manual page 82

List of Configuration Menu Commands
*4
Video Signal
Auto
PAL, M-PAL, N-PAL, PAL60, SECAM
Reset
Setting
Quick Setup
Startup Options
Quick Setup Options
With the "Auto" function, image signals are recognized automatically. If interference appears in the
, NTSC, NTSC4.43,
projected images or no images appear when you select "Auto", select the appropriate signal manually.
Returns all adjustment values in the "Signal" menu except for the "Computer1 Input" and "Computer2
Input" settings to their default values. If you would like to return all menu items to their default, see
"All Reset"
This is used for Quick Setup settings.
Quick Setup cannot be used when "Projection" is set to "Rear" or "Rear/Ceiling".
Quick Setup
Auto Focus
OFF
sp.86
Sets the items that are to be set up automatically when the projector is turned on.
Carries out the operations specified in "Quick Setup Options" when the projector is turned
on.
The focus is adjusted automatically.
Automatic setup is not carried out.
Lets you select which operations are to be carried out when the [Quick Setup] button is
sp.40
pressed.
Auto Focus
Auto Quick Corner
Wall Shot
ON , OFF
ON , OFF
ON, OFF
User's Guide
81
Default setting values
sp.34