Adjusting The Volume - Epson EMP-835 User Manual

Adjusting the Volume

You can adjust the volume for the sound from the projector's built-in speaker
or from the external speakers that are connected to the projector.
PROCEDURE
The volume can be adjusted using either the remote control, the projector's
control panel or the configuration menus. This procedure explains how to
use the remote control and the projector's control panel to adjust the
volume.
For adjustment using the configuration menus:
s"Setting" - "Audio" - "Volume"
Press the [Volume] button on either the remote control or
the projector's control panel.
Press the [ ] button to turn up the volume and press the [ ] button to
turn down the volume.
The volume gauge appears on the screen when the volume is being
adjusted.
Remote control
TIP
• If the value displayed in the gauge on the screen stops changing
when the volume is being adjusted, it indicates that the limit for
volume adjustment has been reached.
• The results of volume adjustment are saved separately for each input
source.
p.83
User's Guide
46