Expanded Functions By Connecting A Computer; Setting Up For Pc Faxing; Modem Specifications; Serial Interface Specifications - Konica Minolta 7115F Instruction Manual

Expanded Functions by Connecting a Computer

8 Expanded Functions by Connecting a
Computer
8.1

Setting Up for PC Faxing

If commercially available LaserFAX or WinFax Pro V.10.0 is installed on
the computer, this machine can be used for PC faxing.
If used for PC faxing, this machine functions as a fax/modem. Using PC
fax software, transmission at 14400 bps between this machine and the
computer is possible. Connect the computer using a 9-pin RS232C
interface cable (purchased separately).

Modem Specifications

The protocol specifications for this machine are as follows.
G
Standard: EIA-578 class 1 fax/modem (does not include data modem)

Serial Interface Specifications

Serial Port Settings
G Bits/sec.:
G Data bit:
G
Parity:
G Stop bit:
G Flow control:
RS-232C serial cable (terminated in a female 9-pin D-Sub connector on
both ends)
Pin assignment
Konica 7115F/7118F
19200 or 38400 (auto baud rate)
8 bits
None
1
Hardware control (CTS/RTS Signal)
8
8-1