To Select The "Copy Setting 2" Menu - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Copy Functions
4
Using the KEYPAD, enter the width
of the area to be erased, and then
press the [ENTER] key.
❍ The width of the area to be
erased can be set between
5 mm and 20 mm.
❍ If you wish to correct the setting, press the [NO] key, and then enter
the new number.
The "COPY SETTING 1" menu appears again.

To select the "COPY SETTING 2" menu

1
Press the [INITIAL SET] key.
2
Press the [ ] key 5 times to select
"COPY SETTING 2".
3
From the KEYPAD, press the key ([1] through [5]) for the "COPY
SETTING 2" function that you wish to set.
❍ The "COPY SETTING 2" functions are as follows:
1 MIXED ORIGINAL
2 COPY PRIORITY
3 OUTPUT PRIORITY
4 4 IN 1 COPY ORDER
5 CRISSCROSS MODE
Tip
If, at any time, you wish to quit setting a "COPY SETTING 2" function,
press the [NO] key. When the message "STOP SETTING?" appears,
press the [YES] key to quit.
Konica 7115F/7118F
9
9-37