Initial Set Mode – Copy Functions
To specify the automatic paper size detection units ("INCH/METRIC"
function)
1
Select the "PAPER SOURCE
SETUP" menu.
❍
Refer to "To select the "PAPER
SOURCE SETUP" menu" on
page 9-12.
2
Press the [1] key from the KEYPAD
to select "INCH/METRIC".
3
Using the [ ] and [ ] keys, select a
paper tray, and then press the
[ENTER] key.
4
Using the [ ] and [ ] keys, select
either "METRIC" or "INCH", and
then press the [YES] key.
The "PAPER SOURCE SETUP"
menu appears again.
Konica 7115F/7118F
9
9-13