Precautions For Loading Documents Into The Automatic Document Feeder; Precautions For Positioning Documents On The Platen Glass - Konica Minolta 7115F Instruction Manual

3
Precautions for Loading Documents into the Automatic Document
Feeder
The following types of documents should not be loaded into the Automatic
Document Feeder, otherwise paper misfeeds or damage to the document
may occur. Instead, these types of documents should be positioned on the
Platen Glass.
G
Thin documents such as typewriter paper or paraffin paper
G Thick documents
G
Standard size documents larger than A3 L or smaller than A5
G
Documents that are highly translucent or transparent such as OHP
transparencies or diazo photosensitive paper
G Wrinkled, folded, curled (rolled), or torn documents
G
Documents bound with glue, staples or paper clips
G Coated documents such as carbon-backed paper

Precautions for Positioning Documents on the Platen Glass

The following precautions should be observed when positioning the
above-listed types of documents on the Platen Glass.
G For documents of a non-standard size:
The document size cannot be detected automatically; therefore, the
"APS" and the "AMS" functions cannot be used. Press the [PAPER
SIZE] key and select the appropriate paper size (paper tray), or press
the [LENS] key and select the appropriate zoom ratio. (p. 4-12 and
p. 4-22)
G For highly translucent or transparent documents (such as OHP
transparencies or diazo photosensitive paper):
Place a blank sheet of paper of the same size over the document.
(p. 4-6)
G For objects such as books (thick documents):
Scan without closing the Original Cover or Automatic Document
Feeder. In addition, do not press down extremely hard on the
document, otherwise the machine may be damaged. (The Platen
Glass can only resist a weight of up to 3 kg)
3-44
Before Making Copies or Faxing
Konica 7115F/7118F