Basic Copy Operations; Loading The Document; With The Automatic Document Feeder; To Load The Document - Konica Minolta 7115F Instruction Manual

Basic Copy Operations

4 Basic Copy Operations
4.1

Loading the Document

The document can be loaded into the Automatic Document Feeder
(optional) or positioned on the Platen Glass. Position the document
correctly according to the type of document being copied.

With the Automatic Document Feeder

To load the document

1
Adjust the Document Guide Plates
to fit the size of the document.
2
Load the document pages to be
copied face up into the Automatic
Document Feeder.
? Have the necessary precautions
been observed when loading
the document?
➜ A maximum of 50 document
pages can be loaded.
➜ Do not load so many pages that the top of the stack is higher than
the [ ] mark.
➜ Be sure to adjust the Document Guide Plates so that they are
against the edges of the document, otherwise the document may
not be fed in straight.
➜
The paper sizes that can automatically be detected when loaded
into the Automatic Document Feeder are A3 L, B4 L, A4 L, A4 C,
A5 L, Letter L, Letter C and F4. If paper of other sizes or non-
standard sizes is loaded, the size cannot be detected or it may be
detected incorrectly.
Konica 7115F/7118F
4
4-1