To Make Copies After Specifying A Copy Density - Konica Minolta 7115F Instruction Manual

4

To make copies after specifying a copy density

1
Load the document to be copied.
❍ Refer to "Loading the Document" on page 4-1.
2
Press the [DENSITY SET] key to
select between the "[A]" (AUTO),
"PHOTO" and "TEXT" settings.
❍ The current setting appears on
the left side of the screen.
3
If the "PHOTO" or "TEXT" setting
was selected, use the [ ] and [ ]
keys to adjust the density level.
4
If necessary, specify any other copy settings.
❍ Paper (p. 4-11)
❍ Zoom (p. 4-21)
5
Enter the number of copies to be made on the KEYPAD, and then
press the [START] key.
4-26
Basic Copy Operations
Konica 7115F/7118F