Faxing
To fax documents positioned on the Platen Glass
1
Press the [FAX] key.
The machine enters Fax mode, and
the fax screen appears.
2
Lift open the Original Cover, and
then position the document to be
faxed on the Platen Glass.
❍
Position the document face
down.
❍
Align the document on the
scales above and to the left of
the Platen Glass.
❍
If the Automatic Document
Feeder is not installed, skip to step 4.
3
Press the [BOOK TX] key.
❍
Even when faxing sheet
documents positioned on the
Platen Glass, the [BOOK TX]
key should be pressed.
4
If necessary, change the "Resolution" setting (p. 6-8).
5
Using the KEYPAD, enter the fax
number of the recipient, and then
press the [YES] key.
❍
The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing" on page 6-10.
Konica 7115F/7118F
6
6-5