Using The Custom Paper Size Feature; Operator Panel Access - TallyGenicom 9045N User Manual

3-18 45 PPM Laser Printer User Guide

Using the Custom Paper Size Feature

Using the Custom Paper Size Feature

Operator Panel Access

The Paper Menu provides access to the Custom Paper Size settings. The range for setting a custom
paper size is:
Paper Width
Paper Length
Use the following procedure to enter the Paper Menu to set a Custom Paper Size:
1. Press the MENU button on the control panel and navigate to Paper Menu.
2. Press the SELECT button to enter the Paper Menu.
3. Press the NEXT button until the text Media Size/Type is shown on the second line of the
display and press the SELECT button.
4. Press the NEXT button until the text Tray 1 or Tray 2 is shown on the second line of the
display and press the SELECT button.
5. Press the SELECT key and press the NEXT key until the second line says Off. Press the
SELECT key until Auto-Sense is shown on the second line.
6. Press the SELECT key and press the NEXT key until the second line says Off.
7. Press the SELECT key.
8. Press the NEXT button until the text Custom Size is shown on the second line of the dis-
play.
9. Press the SELECT button to enter the Custom Size menu. Width is shown on the second
line of the display.
10. Press NEXT or PREVIOUS to increase or decrease each digit of the three-digit number to
set the width of your paper. When the width of paper is correct, press the SELECT button.
11. Next Length is shown on the second line of the display.
12. Press NEXT or PREVIOUS to increase or decrease each digit of the three-digit number to
set the length of your paper. When the length of paper is correct, press the SELECT button.
13. Press RETURN until you exit out of all the submenus and return to READY.
3.5 inches (98 mm) minimum to 8.5 inches (215 mm) maximum
5.5 inches minimum to 35.43 inches maximum
Jul 07