Turning The Printer On - TallyGenicom 9045N User Manual

Turning the Printer On

Switch on the power before operating the printer. When you have finished using the printer for the
day or you do not intend to use it for a long period of time, switch off the power.
1. Press the switch to the <I> position to turn the power on.
NOTE: The printer motors run for 2 or 3 minutes when you first turn the power on.
The top line of the LCD display reads:
followed by asterisks progressing across the bottom line:
Following an LED self test, asterisks progress across both lines of the display, the alarm will also
sound for a few seconds.
After the alarm sounds, Initializing is displayed for several seconds:
and the Power On Self Test ends with the top line of the display reading:
NOTE: While turned on, the printer will go into the standby state if it remains idle for a period of
time.
2. Press the Info button to print a Configuration Page with Menu Map.
Jul 07
Loading
**************
**************
**************
Initializing
Ready
45 PPM Laser Printer User Guide 1-15
Installation Procedure