Replacing The Feed Roll; Feed Roll At The Paper Tray - TallyGenicom 9045N User Manual

Replacing the Feed Roll

NOTE: The following procedure explains how to replace the feed roll of the paper tray. Follow the
procedure here for replacing the feed roll of the tray module as well.

Feed roll at the paper tray

1. Power the printer off.
2. Pull the paper tray out of the printer.
NOTE: When replacing the feed roll of tray 2, pulled out both tray 1 and tray 2.
The feed roll on tray modules can be replaced without pulling out the paper tray.
3. While pushing down the shaft of the feed roll as shown in the diagram (1), widen the tab of
the feed roll to loosen it (2) and then slowly remove the feed roll from the shaft on the paper
tray (3).
Jul 07
45 PPM Laser Printer User Guide 4-13
Feed Roll