Paper Incorrectly Fed; Other Problems - TallyGenicom 9045N User Manual

Paper Incorrectly Fed

Status
Paper cannot be fed.
Paper jams occur.
Multiple sheets of paper are fed.
Paper is fed at an angle.

Other Problems

Status
Strange noise occurs.
Jul 07
Items to check
Is the paper correctly set?
Is the paper damp?
Is the correct type of paper used?
Is the paper tray pushed in?
Is the paper jammed?
Is the printer placed on a flat
location?
Are the paper tray guides set in the
correct positions?
Did you print any picture postcards?
Items to check
Is the printer placed on a flat
location?
Is the top cover open?
Is the paper tray pushed in?
Are there foreign objects inside the
printer?
45 PPM Laser Printer User Guide 5-21

Paper Incorrectly Fed

Action
Load the paper correctly. For
transparencies, postcards or
envelopes, fan them well first to allow
air to enter between each sheet
before loading.
Replace with paper from a new
ream.
Load the correct type of paper.
See "About Paper" on page 2-4.
Push the paper tray completely into
the printer.
Remove the jammed paper.
Place the printer on a stable surface.
Set the length guide and width guide
in the correct positions.
Clean the feed roll.
See "Feed Roll" on page 2-12.
Action
Shift the printer to a stable surface.
Close the top cover tight.
Push the paper tray completely into
the printer.
Switch off the power and remove any
foreign objects inside the printer.
If the object cannot be removed
unless the printer is disassembled,
contact Technical Support.