Setting Paper Types; Settings On The Control Panel - TallyGenicom 9045N User Manual

Setting Paper Types

Prior settings on the control panel are required for the types of paper loaded in trays 1 to 4. For
accurate image quality processing, refer to the following table and set the paper types on the con-
trol panel.
Important:
• Paper type settings must match those of the actual paper loaded in the trays. Otherwise,
image quality cannot be processed accurately. Toner may not fuse properly on the paper,
resulting in dirty and poor quality printouts.
• Changes in paper type settings on the printer driver are not reflected in this printer.
Refer to:
• Paper and paper types that can be loaded:
Paper name
FX P
FX EPR, FX
Green 100
Label, envelope
JE001

Settings on the Control Panel

1. Press the <MENU> button to display the Menu screen.
2. Press the < > or < > button until [Paper Menu] is displayed, then press the < > button.
3. Press the < > or < > button until [Media Size/Type] is displayed, then press the < > but-
ton.
4. Press the < > or < > button until [Paper Type] is displayed, then press the < > button.
5. Press the < > or < > button until the required tray is displayed, then press the < > but-
ton.
6. Press the < > or < > button until the correct paper type is displayed for the loaded paper,
then press the <FEED/SELECT> button.
7. Press the <MENU> button.
Jul 07
Weight Paper type set in tray
2
60–90 g/m Plain (default)
(16–24 lb)
2
60–90 g/m Recycled
(16–24 lb)
2
90–156 g/m Thick 1
(24–42 lb)
2
157–216 g/m Thick 2
(42–57.5 lb)
– Transparency
45 PPM Laser Printer User Guide 2-13
Special Settings