Device Parameter Sets; Warmstart.ps And Sys/Start Files - TallyGenicom 9045N User Manual

3-10 45 PPM Laser Printer User Guide
Using the Hard Disk Option and CF Card
initializedisk
dosysstart
setdosysstart

Device Parameter Sets

When installed, a device parameter set will be supported for either or both FLASH and hard disk
options. The parameter sets can be referenced using the device names%flash% or%disk0%. Each
parameter set will include the following parameters:
LogicalSize
Writeable
BlockSize
Searchable
SearchOrder
Type
Mounted
HasNames
PhysicalSize
InitializeAction
Free
Removable

Warmstart.ps and Sys/Start Files

When either or both the FLASH or hard disk options are installed, there are two features which
provide support for automatic execution of a PostScript program during power-on initialization.
The first feature is the warmstart.ps file. Each time the printer is powered on, either or both optional
storage devices will be checked for a file named warmstart.ps. If this file is found, it will be read and
parsed by the PostScript interpreter. It is up to the PostScript programmer to create the content of
this file and get the file onto the storage device using the PostScript device and file operators.
The second feature is the Sys/Start file. If either or both of the optional storage devices are
installed, an additional parameter will be supported in the System Parameter set. This parameter is
an integer parameter called StartupMode and is set to 1 by default.
NOTE: This parameter can be read or written using the dosysstart and setdosysstart operators.
Each time the printer is powered on, if the StartupMode parameter is set to 1, either or both the
optional storage devices will be searched for a file called Sys/Start, a file named Start in a path called
Sys. If this file is found, it will be read and parsed by the PostScript interpreter. Again, it is up to the
PostScript programmer to create the content of this file and get the file onto the storage device
using the PostScript device and file operators.
Jul 07