1-16
45 PPM Laser Printer User Guide
Selecting a Display Language
Selecting a Display Language
The default language for all LCD display messages and the Configuration Summary and Test Page
is English. You can change to one of several languages.
NOTE:
The language that you select will be reflected on all LCD display messages, and also the
content of the Configuration Summary.
To change the default language from English to one of the other four available selections:
1.
From the READY status, press MENU, the control panel display will read:
2.
Press PREVIOUS or NEXT until the display reads:
3.
Press SELECT, the display will read:
4.
Press NEXT or PREVIOUS until the display reads:
5.
Press SELECT, the display will read:
6.
Press NEXT or PREVIOUS until the desired default language appears on the bottom line
of the display.
7.
Press SELECT. You have now changed the default language.
8.
Press START/STOP to return the printer to the ready mode.
Menu
Job Library
Menu
System Menu
System Menu
Factory Defaults
System Menu
Display Language
System Menu
English
Jul 07