Pcl Menu - TallyGenicom 9045N User Manual

2-28 45 PPM Laser Printer User Guide

PCL Menu

PCL Menu

The PCL Menu provides access to the PCL settings. Use the following procedure to enter the PCL
menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text PCL Menu is shown on the second line of the display.
3. Press the SELECT button to enter the PCL menu.
4. Press the NEXT button to move through the submenus: Orientation, Font Source, Font
Number, Pitch, Symbol Set, Macro Filter, Lines Per Page, CR Mode, LF Mode, FF
Mode, and Print Area.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the PCL settings:
Submenus Default Setting
Orientation Portrait
This submenu allows
you to choose the
orientation of the
page.
Font Source Internal
This submenu allows
you to choose a font
source.
Font Number 0
This submenu allows
you to set the font
number.
Pitch 10.00
This submenu allows
you to change the
pitch of text.
Available Settings
Portrait
Landscape
Internal
Downloaded
Dependent on model of printer and
options installed
0.08 – 100.00
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to
toggle between PORTRAIT
and LANDSCAPE.
2. Press SELECT to choose and
save an orientation.
1. Press NEXT or PREVIOUS to
scroll through the available font
sources.
2. Press SELECT to choose and
set a source.
1. Press NEXT or PREVIOUS to
increase or decrease the font
number.
2. Press SELECT to save this
setting.
1. Press NEXT or PREVIOUS to
increase or decrease the pitch.
2. Press SELECT to save this
setting.
Jul 07