Job Library Errors - TallyGenicom 9045N User Manual

2-40 45 PPM Laser Printer User Guide
Job Library
Submenu

Job Library Errors

When a Job Library error occurs, the following message will be displayed:
JOBLIB Error XX
Press Start
This is a continuable-fault, which means the START key must be pressed to allow operations to
continue. If the current job is aborted as a result of the error, the message "Canceling Job" may be
displayed after START is pressed. "XX" in the error display above is an error code. The error codes
for this message are:
01 – Data stream was missing a Job Name specification. (Job will be aborted.)
02 – Data stream was missing a User Name specification. (Job will be aborted.)
03 – Data stream was missing a PIN specification. (Job will be aborted.)
04 – Attempted to overwrite a PRIVATE job, but PIN did not match. (Job will be aborted.)
05 – Insufficient storage. (Job will be aborted only if it is a PRIVATE job.)
Default Setting Available Settings
Delete
User Folder 1
Delete
Job1
Job Name This step is necessary if
PIN the job is a PRIVATE job.
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to
scroll through the User Folder
Names.
2. Press SELECT to choose the
desired User Folder.
1. Press NEXT or PREVIOUS to
scroll through the Print Job
Names.
2. Press SELECT to choose the
desired Print Job to Delete.
1. Press NEXT or PREVIOUS to
increase or decrease each digit of
the four-digit number.
2. Press SELECT to set one digit and
move to the next digit.
3. Press SELECT after changing the
last digit to save this setting.
Jul 07