Error Messages - TallyGenicom 9045N User Manual

Error Messages

The table below lists error messages, the possible causes of each error, and the actions required to
recover from each error.
Error Message Line 1
MISFEED JAM
E3 FUSER JAM
EXIT JAM
OFFSET TRAY JAM
E7 JAM DUPLEX
COVER OPEN
COVER OPEN
COVER OPEN
TRAY 1 MISSING
TRAY 2 MISSING
TRAY 3 MISSING
TRAY 4MISSING
LOAD PAPER TRAY1
LOAD PAPER TRAY2
LOAD PAPER TRAY3
LOAD PAPER TRAY4
PAPER SIZE ERROR
OUTPUT TRAY FULL
OFFSET TRAY FULL
TONER MISSING
ID MISMATCH
Jul 07
Error Message Line 2
Remove Paper
Close Top Cover
Close Rear Cover
Close OCT Cover
Insert Tray
Insert Tray
Insert Tray
Insert Tray
Paper Size/Paper Type
Paper Size/Paper Type
Paper Size/Paper Type
Paper Size/Paper Type
Paper Size/Press Start
Remove Paper
Remove Paper
Install/Reset
45 PPM Laser Printer User Guide 5-23
Warning Messages and Error Messages
Possible Cause
There is a paper jam
inside the printer.
The top cover is open.
The rear cover is open.
The offset tray cover is
open.
Tray 1 is not in the
printer.
Tray 2 is not in the
optional feeder.
Tray 3 is not in the
optional feeder.
Tray 4 is not in the
optional feeder.
Tray 1 is empty.
Tray 2 is empty.
Tray 3 is empty.
Tray 4 is empty.
The paper size is not
supported by the printer.
The output tray is full.
The offset output tray is
full.
The toner cartridge is
missing or not installed
correctly.
Wrong toner cartridge is
installed.
Action
Remove the jammed
paper from the indicated
location.
Close the top or rear
cover.
Close the rear cover.
Close the offset tray
cover.
Insert the tray.
Insert the tray.
Insert the tray.
Insert the tray.
Load paper into the tray.
Load paper into the tray.
Load paper into the tray.
Load paper into the tray.
Check paper size
specifications and load
paper that meets
specifications.
Remove paper from the
tray.
Remove paper from the
tray.
Install the toner
cartridge or reinstall the
toner correctly.
Remove toner cartridge
and install the correct
one.