Clearing Paper Jams - TallyGenicom 9045N User Manual

5-2 45 PPM Laser Printer User Guide

Clearing Paper Jams

Clearing Paper Jams

When there is a paper jam, refer to the following diagram and the description of the action to be
taken to remove the paper immediately.
NOTE: The diagram below shows the printer with the two optional tray modules, duplex module,
and offset catch tray installed.
"At the Fuser Unit"
"At the Duplex Module"
"At the Paper Trays"
CAUTION: Never touch areas labeled as "High Voltage". You can get an electric shock.
Never touch a labeled area found on or near the heat roller. You can get burned. If a sheet of
paper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or
burns. Switch off the machine immediately, and contact Technical Support.
NOTE: If the jammed paper is removed without opening the top cover, you still need to open and
close the top cover. Doing this will remove the error message.
NOTE: Paper jams could be due to the printer installation environment and type of paper used.
"At the Offset Catch Tray"
"At the Toner Cartridge"
Jul 07