5.
Squeeze the length guide and slide it to the desired paper size.
6.
Squeeze the right width guide and slide it to the desired paper size.
7.
Load the paper with the side to be printed facing up and with all 4 corners aligned. Do not
place paper over the right width guide.
8.
Close the lid of the paper tray.
9.
Push the paper tray completely into the printer.
Connecting the Data Cable
1.
Determine the connection method to be used.
2.
Connect the cable to the appropriate connector on the printer panel (Refer to
View" on page
Jul 07
1-4).
45 PPM Laser Printer User Guide 1-13
Installation Procedure
"Rear-Left