Installing The Compact Flash (Cf) Card - TallyGenicom 9045N User Manual

3-6 45 PPM Laser Printer User Guide

Installing the Compact Flash (CF) Card

Installing the Compact Flash (CF) Card

1. Carefully review the safety precautions in the front of this guide before starting this installa-
tion procedure.
2. Ensure that the printer power switch is set to the OFF <O> position.
3. Disconnect the power cord from the wall outlet.
4. Remove the inside panel (see
5. Locate the CF socket on the controller below the space that receives the Hard Drive. Align
the CF Card with the socket and carefully insert the card
card to the socket so that the notch on both sides of the compact flash are uppermost and
insert square into the socket.
6. Reinstall the side covers in reverse order (see
Steps 3, 4, and 5).
7. Connect the power cord to the wall outlet. Turn the printer power switch to the ON <I>
position.
8. When ready, the printer will advise to press the select key to format the compact flash. This
has to be done so that the compact flash can be used.
The installation of the CF Card option in your printer is now complete.
"Installing DRAM Memory DIMMS"
Figure 3-8
"Installing DRAM Memory DIMMS"
Figure 3-1).
Carefully align the compact flash
.
–
Jul 07