When Problems Occur; No Power; Cannot Print - TallyGenicom 9045N User Manual

5-14 45 PPM Laser Printer User Guide

When Problems Occur

When Problems Occur
When problems occur while using the printer, search for the corresponding item from the follow-
ing list of problems to carry out the appropriate action.

No Power

Status
There is no power.
Power is interrupted
frequently.

Cannot Print

Status
Print instruction was
sent but processing
did not start.
Items to check
Is the power switched off?
Is the power cord disconnected or not
securely connected?
Is the power cord connected to a power
outlet with the correct voltage?
Printer may have malfunctioned.
Is the power cord disconnected or not
securely connected?
Items to check
Is the fault indicator lit?
Is the fault indicator blinking?
Is the print-ready indicator off?
Is there any message displayed on the
control panel?
Is there any message displayed in the
computer?
Action
Press the printer switch to the <I> position to
turn the power on.
See "Turning the Printer On" on page 1-15.
Switch off the power and connect the cord to
the power outlet and printer again. Then,
switch on the power.
See "Connecting the Power Cord" on page
1-14.
Connect the printer exclusively to an outlet
with a suitable voltage rating and current
rating.
See "Connecting the Power Cord" on page
1-14.
Switch off the power to the printer, remove the
plug from the power outlet and contact
Technical Support.
Switch off the power and connect the cord to
the power outlet and printer again. Then,
switch on the power.
See "Connecting the Power Cord" on page
1-14.
Action
Carry out the action according to the status of
the indicator.
Check the message, then carry out the action.
Check the message, then carry out the action.
Jul 07