1-14
45 PPM Laser Printer User Guide
Installation Procedure
Connecting the Power Cord
WARNING! Two power specifications are listed below. The specifications that apply to your
printer depend on its configuration. Connect the power plug only to a properly rated power out-
let. Otherwise, it can cause fire or electric shocks. If in doubt, contact Technical Support.
110V Model: 110–127VAC 50–60Hz, 12.2A
230V Model: 220–240VAC 50–60Hz, 5.8A
To prevent fire or electric shock, follow the instructions below based on your machine configura-
tion.
1.
Connect the power cord to the power cord connector at the back of the printer.
2.
Make sure that the power switch has been firmly pushed to the < > (Off) position and then
insert the other end of the power cord to the power outlet.
Jul 07