Using A Network Cable - Panasonic KX-P7500 Operating Instructions Manual

Connect the other end of the parallel interface cable into the appropriate
4
parallel connector on your computer and tighten the screw.
N
OTE
•
The actual connector on the computer may differ depending on the manufacturer of the computer.

Using a network cable

If you use KX-P7510 or KX-P7500 with the installed optional network card KX-PNB2, you can
connect your printer to an Ethernet 10/100 Base-T network.
N
OTE
•
Use Category 5 shielded twisted pair cable with RJ-45 connector.
Make sure the printer and the computer are turned off.
1
Connect a shielded twisted pair network cable to the RJ-45 port on the rear
2
of the printer.
MIDI/GAME LINE LINE PHONE LINE
OUT IN
RJ-45 port
44
Setting up the Printer