Ozone release
Warning
•
Make sure that the printer is installed in a well ventilated room so as not to increase density of
ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be
ventilated.
Moving the unit
The printer weighs approximately 17 kg {37.4 lbs.}. The back of the printer should be facing you
when you move it. Turn the power off and remove the power cord when handling the unit.
Caution labels
(220–240 VAC equipment)
CLASS
KLASSE
CLASSE
CLASE
1 LASER PRODUCT
1 LASER PRODUKT
1 LASER PRODUIT
1 LÁSER PRODUCTO
11