Panasonic KX-P7500 Operating Instructions Manual page 153

Insert the connector on the network card into the network card connector on
3
the printer control board until it is completely in place.
The two connectors should fit snugly together.
Network card
connector on
the printer
Connector on
the network card
Gently tighten the screws to secure the card to the printer control board.
4
Continue with
5
Connect a twisted-pair network cable (not supplied) to the RJ-45 port.
6
Screw
"To close the printer cover:" on page 140.
RJ-45 port
153
Options
A twisted pair
network cable