Table of Contents
Advertisement
•
To avoid damaging the printer, use only transparencies and labels recommended for use in laser
•
To avoid damaging the printer, do not use ink jet transparency.
•
Transparencies and adhesive material of labels should be stable at 205°C (400°F), the printer's
maximum temperature.
•
Re-using transparencies that have been fed through the printer once (for example, after jams or if
the transparency is ejected without being printed) can reduce the life of the consumables and
paper path components.
•
When using transparencies, if the print quality is poor, print on the other side.
•
Margins for transparency:
•
With any label stock, the labels must completely cover the backing material.
YES
Labels cover the entire backing material.
The backing material is exposed.
printers.
Printable area
13 mm (0.5")
NO
4 mm (0.16")
Margins
4 mm (0.16")
13 mm (0.5")
204
Appendix
Advertisement
Table of Contents
