Table of Contents
Advertisement
CONFIG MENU
Use the CONFIG MENU to configure a variety of printer features.
CONFIG MENU Items
Menu
CONFIG
MENU
Item
EMUL
AUTO (Factory Default)
PCL
PS II (If the PostScript SIMM is installed)
HEXDUMP
You can select the emulation for printing a document.
PWR SAVE
OFF
15 (Factory Default)
30
45
60
The PWR SAVE (POWER SAVE) menu item lets you reduce power
usage when the printer is idle. The PWR SAVE setting determines
the length of time (in minutes) the printer waits after the last print
job is received or pressing any button on the operator panel before
it automatically goes to a reduced power state. Full power mode is
restored when the printer receives a job or when you press any
button on the operator panel. To conserve energy and operating
cost, this printer is provided with a programmable power save
(PWR SAVE) feature. The printer is factory set with the power save
feature turned on and programmed to 15 minutes to comply with
E
NERGY
AUTOCONT
ON (Factory Default)
OFF
The AUTOCONT (AUTO CONTINUE) setting determines whether
the printer continues printing after it detects paper mismatch.
If an error occurs and AUTOCONT is set to OFF, the printer stops
and waits for operator intervention. If the ON LINE/CONTINUE
button on the operator panel is pressed, the printer continues
printing regardless of paper mismatch. When AUTOCONT is set to
ON, the printer automatically resumes processing.
Values and Functions
S
® requirements.
TAR
79
Using the Printer
Advertisement
Table of Contents
