Table of Contents
Advertisement
Make sure both metal clips on the connector are fastened, and the two pins
3
on each of the connector are pushed through the holes on the PS SIMM.
4
Continue with
"Installing a LocalTalk/RS-232C Interface Card" on page
Installing a Network Card for Ethernet
The following section explains how to install a Network Card for Ethernet (KX-PNB2) on the KX-
P7500.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
metal surface, such as the printer's bare metal frame prior to touching the component.
"Installing a Network Card for Ethernet" on page 177
Network Card for Ethernet
For Macintosh User's Guide
Metal clip
180.
page
171), touch a grounded
177
or
Advertisement
Table of Contents
