Table of Contents
Advertisement
To install a PS SIMM, you will need to remove and replace the printer cover. For instructions, see
"Removing the printer cover" on page
To install a PS SIMM:
Unpack the PS SIMM.
1
Do not touch the connector edge on the PS SIMM.
Notch
Connector
edge
Hold the PS SIMM with the connector edge pointing toward the connector
2
(CN9 or CN10) and position the notch as shown.
Insert the PS SIMM all the way into the connector at a 30o angle, and rotate
it to the left until it snaps into place.
172.
Notch
176
For Macintosh User's Guide
Advertisement
Table of Contents
