Connecting network cables (For Network Printing)
Connect to network using standard cabling that you use for other network components. Make sure
the printer is turned off before connecting to the port.
N
OTE
•
There are no special cabling requirements.
Connect a twisted-pair network cable (not supplied) to the RJ-45 port.
1
Continue with
2
N
OTES
•
The first green LED comes on when the cable is connected to the port on the Ethernet Network
Card.
•
After booting, the second green LED should blink irregularly and the first green LED should come
on continuously.
"Installing software" on page
For Macintosh User's Guide
RJ-45 port
188.
186
A twisted pair
network cable