Minimum space requirements
12" (300 mm)
enough space to allow
opening of the rear cover
8" (200 mm)
enough space
for ventilation
Power source
•
The voltage level of the power source must not vary more than ±10% from the voltage level
marked on the nameplate (located on the back of the unit).
•
Do not use an extension cord.
•
Do not use a line conditioner, transient suppressor or surge protector as it may cause a machine
error.
20" (500 mm)
enough space so that
cassette can be removed
4" (100 mm)
24"
(600 mm)
Before You Start
12" (300 mm)
enough space to allow
opening of the top cover
and replacement of the
toner cartridge
10" (254 mm)
20