Table of Contents
Advertisement
Installing a PostScript SIMM
The following section explains how to install a PS SIMM (KX-PPSU4) on the KX-P7500 Series.
To install the PS SIMM, you will need to do the following:
•
Remove the printer cover from the right of the printer. See
•
Install a PS SIMM in the empty slot on the printer controller board.
•
Replace the printer cover. See
I
MPORTANT
•
To prevent static electricity damage to certain components (see
metal surface, such as the printer's bare metal frame prior to touching the component.
Kit contents
•
PS SIMM (KX-PPSU4)
C
AUTION
•
Do not drop or bend the PS SIMM.
•
Do not touch the connector edge of the PS SIMM.
•
Protect the PS SIMM from static electricity by keeping it in its antistatic package until you are
ready to install it.
•
Avoid exposing the PS SIMM to direct sunlight, high temperatures, or humidity.
N
•
PS SIMM Contains the PowerPage® Level 2J interpreter from Electronics for Imaging,
Inc.
page
OTE
page
140.
136.
page
136), touch a grounded
148
Options
Advertisement
Table of Contents
