Table of Contents
Advertisement
Both side (Duplex) printing
The printer can automatically print on both sides of paper by setting the Printing Menu or Finishing
tab of KX-P7500 Series PCL6 Driver.
N
OTES
•
Do not print on both sides of labels, transparencies, envelopes, or paper heavier than
2
90 g/m
(24 lbs.).
This may damage the printer and cause a jam.
•
You should not expect the same print quality and reliability that you get with one-sided printing.
Menu setting procedure
If you use the driver which has not the properties, you can select "DUPLEX" by setting the operator
panel menu.
1
Make sure "READY" appears on the display.
Press ON LINE/CONTINUE button.
2
"OFFLINE" appears on the display and the printer is off-line.
Press MENU button until you see "PRINTING MENU".
3
Press ITEM button until you see "DUPLEX".
4
Press VALUE button until the setting you need appears on the display.
5
(For more information, see
Press ENTER/CANCEL button to save the selection.
6
An asterisk (¢) appears beside the current user default setting for that menu item.
N
OTE
•
Settings in the printer driver and software application override operator panel setting.
For instructions of setting the operator panel menu, see
page
78).
page
72.
99
Using the Printer
Advertisement
Table of Contents
