Table of Contents
Advertisement
Menu
Item
CONFIG
TON.SAVE
MENU
JAM RECV
TONERLOW
SWITCH
(If the 2nd
feeder is
installed)
LOCKTRAY
(If the 2nd
feeder is
installed and
the SWITCH
menu item is
set to ON)
Values and Functions
OFF (Factory Default)
ON
The TON.SAVE (TONER SAVE) setting helps conserve the toner
cartridge by controlling how much toner the printer uses for print job.
Select OFF if toner conservation is not a concern.
But this setting may affect the print quality of your job.
OFF (Factory Default)
ON
When JAM RECV (JAM RECOVERY) is set to ON, the printer
keeps printed page until the printer signals that the page has
successfully exited the printer. The printer reprints the jammed
page. When JAM RECV is set to OFF, the printer does not reprint a
page that has been jammed after all the image has been drawn on
the page.
CONTINU (Factory Default)
STOP
This setting determines whether the printer continues printing after
the printer detects that the toner is low.
If the toner is low and TONERLOW is set to STOP, press the ON
LINE/CONTINUE button to print. In that case, replace the toner
cartridge or set the TONERLOW menu item to CONTINU.
ON (Factory Default)
OFF
The ON setting makes the printer supply the paper from another
cassette when a cassette is empty.
In case of the OFF setting, an error message is displayed.
When the TRAY menu is AUTO, this Item is not displayed.
NONE (Factory Default)
1ST
OPT
MP
The tray set to LOCKTRAY doesn't supply the paper when another
cassette is empty.
For example, if LOCKTRAY is set to MP, the tray is not switched to
MP tray.
80
Using the Printer
Advertisement
Table of Contents
