Panasonic KX-P7500 Operating Instructions Manual page 82

Menu Item
JOB MENU PAP.TYPE
MENU CLR
MOPT
DUP.TOP
DUP.LEFT
S-BIND
Values and Functions
NORMAL (Factory Default)
THICK
THIN
TRANSP.
The PAP.TYPE (PAPER TYPE) setting lets you specify the type of
print material installed in each tray.
Select NORMAL if the printer material is plain paper (16 to 28 lbs.).
Select THICK if the printer material is thick paper (over 28 lbs.),
high cotton paper, envelopes or labels.
Select THIN if the printer material is thin paper [60 g /m
and the air is humid.
Select TRANSP. if the printer material is transparencies.
The displayed number of print material types may differ depending
on the "PAPER" and "TRAY" item settings.
When you select MENU CLR (MENU CLEAR), the printer resets to
the factory default setting for each menu item.
ON (Factory Default)
OFF
This MOPT (Memory Optimization Technology) setting makes the
printer process more data by optimizing the memory. If the value is
set to ON, the complex data can be processed.
5.0 (Factory Default)
0 to 9.9 mm (In increments of 0.1)
This item lets you select the top margin of the print materials when
the DUPLEX menu item is set to LONG (see
5.0 (Factory Default)
0 to 9.9 mm (In increments of 0.1)
This item lets you select the left margin of the print materials when
the DUPLEX menu item is set to LONG (see
0 (Factory Default)
0 to 22 mm (In increments of 1)
This item lets you select the left margin for the binding when short
edge duplexing (see page
page
page
78).
82
Using the Printer
2
(16 lbs.)]
78).
78).