Options
Installing a hard disk drive
Kit contents
196
The following section explains how to install the hard disk drive on the
KX-P8420. It also describes how to initialize the new hard disk drive for use
from the printer's front panel.
To install the hard disk drive you will need to remove the printer controller
board, install the drive and then replace the printer controller board in the
printer. For instructions, see "Removing and replacing the printer controller
board" on
page
193.
•
Hard disk drive (KX-PDHD1)
•
Four screws
•
Label
SAFETY CAUTION:
•
To avoid electric shock ensure your hands are dry before touching the
printer's power plug.
CAUTIONS:
•
Do not drop or bend the hard disk drive.
•
Do not touch the hard disk drive connector and electrical circuit board.
•
Protect the hard disk drive from static electricity by keeping it in its anti-
static package until you are ready to install it.
•
Avoid exposing the hard disk drive to direct sunlight, high temperatures,
or humidity.
•
Cable
The shape of a cable is subject
to change.
•
Four stand offs