Answering System Operations - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-4(65~85)
Summary of Direct Command for Answering System Operations
See the corresponding pages for function details.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
<Standby mode>
B a s e 1 [ A ]
4 M e s s a g e s
0 N e w C a l l s
Press (INT) then
lights and voice guidance is heard from the speaker.
Message information is displayed for 2 seconds, then function menu is displayed.
A brief voice guidance indicates the number of new message received, then you can
hear "Press 4 to playback new messages" and "Press 5 to playback all messages."
<Direct command>
Press 1
Press 2
3
Press
Press 4
Press 5
ALL ALL
6
Press
Press 7
Press 7
8
ON ON Press
Press 9
Press 0
OFF OFF
Press
Press
ALL ALL
Press
* These functions are available only during incoming/memo message playback.
** This function is available only during your own greeting message playback.
If each operation procedure is not completed within 30 seconds, the display will return to standby
mode.
66
01.7.19 10:23 PM Page 66
.
To repeat an/a incoming/memo message during playback (p. 71)
To skip an/a incoming/memo message during playback (p. 71)
To select the receiver volume during playback (p. 73)
To playback new incoming/memo message(s) (p. 69)
To playback all incoming/memo message(s) (p. 69)
To playback a greeting message (p. 13, 68)
4 To record a memo message (p. 70)
6 To record a greeting message (p. 67)
To set the answering system ON (p. 13, 68)
To stop the answering system operation (p. 71)
To set the answering system OFF (p. 13, 68)
4
To erase one incoming/memo message* (p. 69)
5 To erase all incoming/memo message(s) (p. 70)
6 To erase the recorded greeting message** (p. 68)