Incoming/Memo Message - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-4(65~85)

Incoming/Memo Message

Incoming messages and memo messages are stored in chronological order. New messages cannot be
recorded when "Memory is Full" is heard. We recommend you to erase unnecessary message after
each playback in order to leave more time for recording new incoming/memo message(s).
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To playback new
incoming/memo message(s)
1
Press (INT) then
2
Press or
to "Play New Msg", then press
OR
Press (4).
New incoming/memo message(s) is/are
played back from the speaker on the
handset if recorded.
The unit will announce the remaining
recording time after playback.
The display will return to "Remote
Operation". To return to the standby
mode, press
To erase one incoming/memo
message with function menu
1
During playback an/a incoming/memo
message, press
2
Press or
"Erase One Msg", then press
3
Press or
press .
One incoming/memo message is erased.
The display will return to "Remote
Operation". To return to the standby
mode, press
01.7.19 10:23 PM Page 69
To playback all
incoming/memo message(s)
.
until the arrow points
.
or wait for 30 seconds.
To erase one incoming/memo
message with direct command
.
until the arrow points to
.
to select "Yes", then
or wait for 30 seconds.
1
Press (INT) then .
2
Press or until the arrow points
to "Play All Msg", then press
OR
Press (5).
All incoming/memo message(s) is/are
played back from the speaker on the
handset if recorded.
The unit will announce the remaining
recording time after playback.
The display will return to "Remote
Operation". To return to the standby
mode, press or wait for 30 seconds.
1
During playback an/a incoming/memo
message, press .
2
4
Press then .
One incoming/memo message is erased.
The display will return to "Remote
Operation". To return to the standby
mode, press or wait for 30
seconds.
.
69