Selecting The Base Unit Access - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-4(65~85)

Selecting the Base Unit Access

Automatic base unit access (Auto)
The handset automatically selects a registered base unit.
When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Specified base unit access
You can select one registered base unit (1 to 4) you desire to operate.
You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is Auto (automatic base unit access).
1
Press .
2
Press or
to "Setting Handset", then press
.
3
Press or
to "Select Base", then press
The current setting, "Auto" or a
registered base unit number is at the
arrow.
S e l e c t B a s e
H Auto
B a s e 1
01.7.19 10:23 PM Page 81
until the arrow points
until the arrow points
.
4
Press or to select the desired
base unit.
5
Press .
A beep sounds and the handset will return
to the standby mode.
The selected base unit number will be
displayed.
You can exit the programming mode any time
by pressing .
81