Private Category Feature - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-2(24~37) 01.7.19 10:23 PM

Private Category Feature

When receiving a call, you can easily figure out a person in which category has called by selected display
backlight colour and ringer type for each private category. We recommend you to write down the private
category table (p. 26) for making the phonebook registration easier.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To select the display backlight
colour for the private category
You can select one of 3 display backlight colours,
green, orange, or red for each category. The factory
preset is green.
1
Press .
2
Press or until the arrow points
to "Setting Handset", then press
3
Press or until the arrow points
to "Display Option", then press
4
Press or until the arrow points
to "Private color", then press
5
Press or to select the desired
category, then press
The current display backlight colour lights.
6
Press or to select the display
backlight colour.
Each time you press
backlight colour will change and lights.
Ex. Red is selected for the category 1.
P r i v a t e C o l o r
H Red
7
Press .
A beep sounds.
To return to the standby mode, press
or wait for 60 seconds.
Page 25
To select the ringer type for
the private category
You can select one of 20 ringer types
category.
1
Press
2
Press
"Setting Handset", then press
.
3
Press
to "Ringer Option", then press
.
4
Press
to "Private Ring", then press
.
5
Press
category, then press
.
The current ringer type rings.
6
Press
Each time you press
type will change and rings.
or , the display
Ex. Ringer 1 is selected for the category 1.
P r i v a t e R i n g
H R i n g e r
R i n g e r
7
Press
A beep sounds.
To return to the standby mode, press
or wait for 60 seconds.
for each
The factory preset is 1.
.
or until the arrow points to
or until the arrow points
or until the arrow points
or to select the desired
.
or to select the ringer type.
or , the ringer
1
2
.
.
.
.
25