Selecting The Pause Timing - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-3(38~64) 01.7.19 10:42 PM
Other Feature

Selecting the Pause Timing

You can select the pause timing of 3 or 5 seconds, depending on your PBX requirement. Please
consult your nearest Panasonic Service Centre for installation. The factory preset is 3 seconds.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press .
2
Press or
to "Setting Base", then press
"Input Command" is displayed.
3
3
Press , then enter the 4-digit base
unit PIN (p. 55).
4
Press 3 then
OR
3
Press then
Ex. 5 seconds is selected.
I n p u t C o m m a n d
12 33 2 6 7 5 9 0
60
Page 60
until the arrow points
.
1 for 3 seconds.
2
for 5 seconds.
5
Press .
A beep sounds.
The display will return to "Setting
Base". To return to the standby mode,
press .