Clearing Caller Information In The Caller List - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-1(02~23) 01.7.19 10:25 PM
Caller List

Clearing Caller Information in the Caller List

You can clear selected or all caller information in the Caller List.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To clear a selected caller
information in the caller list
1
Press or
The most recent caller's information is
displayed.
2
Press repeatedly to search from the
most recent call or press
to search from the oldest call until the
arrow points to the caller information
you desire to clear.
3
Press .
4
Press or
to "Clear", then press
"Clear ?" is displayed.
5
Press or
press .
A beep sounds and "CLEARED" is
displayed.
After a few seconds, the next caller
information is displayed, or "No Stored
Memory" is displayed if no more stored
caller information in the Caller List. To
return to the standby mode, press
or wait for 60 seconds.
22
Page 22
To clear all caller information in
the caller list
.
repeatedly
until the arrow points
.
to select "YES", then
1
Press or .
The most recent caller's information is
displayed.
2
Press .
3
Press or until the arrow points
to "All Clear", then press
"All Clear ?" is displayed.
4
Press or to select "YES", then
press .
A beep sounds and "CLEARED" is
displayed.
After a few seconds, "No Stored
Memory" is displayed and the handset
will return to the standby mode.
.