Editing A Caller Information In The Phonebook; Clearing A Caller Information In The Phonebook - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-2(24~37) 01.7.19 10:23 PM
Phonebook

Editing a Caller Information in the Phonebook

Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press to enter the phonebook.
The first caller information is displayed.
2
Press or
to the caller information you desire to
edit.
You can also find a name by initial (p. 31).
3
Press .
H Edit
Cl ea r
R e g . T o H o t K e y
4
While "Edit" is at the arrow, press
If you do not need to change the name, go
to step 6.
5
Edit the name up to 16 characters with
the dialling buttons,
(p. 27).

Clearing a Caller Information in the Phonebook

Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press to enter the phonebook.
The first caller information is displayed.
2
Press or
to the caller information you desire to
clear.
You can also find a name by initial (p. 31).
3
Press .
30
Page 30
6
until the arrow points
7
8
9
.
10
, or
C
4
until the arrow points
5
Press .
If you do not need to change the number,
go to step 8.
Edit the number with the dialling buttons
, or .
C
Pressing erases the digit to the left of
C
the cursor. To erase all digits, press and
hold .
C
Press .
Press or to select the desired
category number 1 to 9 or OFF, then
press .
While "Save" is at the arrow, press
A beep sounds and "Saved" is displayed.
To return to the standby mode, press
or wait for 60 seconds.
Press or until the arrow points
to "Clear", then press .
"Clear ?" is displayed.
Press or to select "YES", and
press .
A beep sounds and "CLEARED" is
displayed.
After a few seconds, the display will show
the next caller information.
To return to the standby mode, press
or wait for 60 seconds.
.