Table of Contents
Advertisement
KX-TCD725EM-1(02~23)
01.7.19 10:25 PM
Answering Calls
For basic answering a call operation, see page 12.
If you subscribe to a Caller ID service, the caller information will be displayed after the first ring
(p. 19).
Make sure that the power is ON (p. 12), otherwise the handset will not ring.
Selecting the receiver volume (HIGH, MEDIUM or LOW) or
speaker volume (6 levels) during conversation
Press
to decrease volume, or press
Ex. Receiver volume: HIGH
R e c e i v e r V o l u m e
1 2 3 4 5 6
LOW
Each time you press
The display will return to the talk mode after receiver/speaker volume selection.
Temporary Ringer OFF
1
Press and hold
The handset stops ringing.
2
Press
or any dialling button, (0) to (9), (INT),
Key Answer.
After a few seconds the display will start showing the length of the call.
This function is not available when the handset is on the base unit.
This function is for external call only.
Auto Talk
If you set the auto talk feature ON (p. 16), you can answer a call by lifting the handset off the base unit
without pressing
Display Backlight
The lighted display will stay on for about 10 seconds after pressing a handset button or lifting the
handset off the base unit. You can select one of 3 display backlight colours, green, orange, or red
(p. 49).
Page 17
to increase volume.
HIGH
or
, the volume level will change.
for 1 second while handset is ringing.
.
or
to answer a call–Any
17
Advertisement
Table of Contents
