Display Option - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-3(38~64) 01.7.19 10:42 PM

Display Option

In "Display Option" menu, To select the display backlight colour for the private category
(p. 25) is also available.
Selecting the Standby Mode Display
You can select whether to display the currently connected base unit number, handset number or no
display in the standby mode. The factory preset is the base unit number.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press .
2
Press or
to "Setting Handset", then press
.
3
Press or
"Display Option", then press
4
While "Standby Display" is at the
arrow, press
The current setting is at the arrow.
5
Press or
Number", "Handset Number" or
"OFF", then press
A beep sounds.
The display will return to "Standby
Display". To turn to the standby mode,
press or wait for 60 seconds.
You can exit the programming mode any time
by pressing .
46
Page 46
Ex. "Base Number" is selected.
until the arrow points
until the arrow points to
Ex. "Handset Number" is selected.
.
.
Ex. "OFF" is selected.
to select "Base
.
B a s e 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
INT.1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0