Table of Contents
Advertisement
KX-TCD725EM-3(38~64)
01.7.19 10:42 PM
Selecting the Selected then All Handsets Ringer
Mode
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press
.
2
Press
or
until the arrow points
to "Setting Base", then press
"Input Command" is displayed.
3
1
Press
, then enter the 4-digit base
unit PIN (p. 55).
The current mode is displayed.
4
Press
3
, then select handset
number(s) you desire to ring first.
The selected handset number(s) blink(s).
Ex. All registered handset number (1 to 6)
is displayed and selected handset
numbers (1 and 5) to ring first blink.
I n p u t C o m m a n d
12
1 3 - 1 2 3 4 5 6
Page 57
5
Press
.
The current number of rings is displayed
at the end of the 2nd line.
.
6
Select the number of rings 1 through 6
with the dialling buttons
then press
.
A beep sounds.
The display will return to "Setting
Base". To return to the standby mode,
press
.
1
to
6
,
57
Advertisement
Table of Contents
