Paging - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-1(02~23) 01.7.19 10:25 PM

Paging

In multi-unit user operation, conversation between handsets is available with intercom feature (p. 83).
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
Paging the Handset from the Base Unit (Handset Locator)
Using this feature, you can locate a misplaced handset.
1
Press on the base unit.
The handset rings for 1 minute and "
2
To stop paging, press
on the base unit.
Selecting the Ringer Type for Paging
You can select one of 20 ringer types for paging.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press .
2
Press or
to "Setting Handset", then press
.
3
Press or
to "Ringer Option", then press
4
Press or
to "Paging Type", then press
The current setting is at the arrow and
rings.
18
Page 18
" flashes.
0 9
, to ,
INT
5
until the arrow points
until the arrow points
.
until the arrow points
6
.
, , or on the handset or
Press or to select the desired
ringer type.
P a g i n g T y p e
H R i n g e r 1
R i n g e r 2
Each time you press a button, selected
ringer type sounds.
Press .
A beep sounds.
The display will return to "Paging
Type". To return to the standby mode,
press or wait for 60 seconds.